2019 Honda Passport Tires in Seekonk, MA

For this model year, the manufacturer's published schedule calls for rotating the wheels and tires every 10,000 miles. An inspection may support an earlier visit when wear is uneven or the vehicle develops vibration. Tire condition and service history should guide the final decision.

• Rotation helps distribute corner-to-corner wear.
• Tread depth should be measured on all four tires.
• Pressure is set to the vehicle placard specification after service.

The inspection can identify uneven wear, vibration clues, or tread-wear indicators that may point toward replacement. Recommendations are based on what is found during the inspection and on the tires actually fitted to the vehicle.

• All four tires receive a tread-depth measurement.
• The rotation follows the manufacturer-specified pattern.
• The monitoring system is reset after pressure is set.

The drivetrain configuration should be confirmed during service before the tires are moved. Directional tread and staggered fitments can change the appropriate rotation method, so the technician should follow the manufacturer's guidance for the vehicle and tire setup.

• Drivetrain affects how tire positions are changed.
• Directional tread can limit movement between sides.
• Staggered fitments can limit movement between axles.

On an all-wheel-drive vehicle, mismatched tread depth can load the driveline, which is why the answer differs from a two-wheel-drive vehicle. A tread-depth inspection and the vehicle's service history help determine whether one tire, a pair, or the full set is the appropriate recommendation.

• Compare tread wear across all four tires.
• Check the tread-wear indicators and visible condition.
• Consider drivetrain requirements before replacing fewer than four.

Uneven tread wear and vibration at highway speed are additional reasons to arrange an inspection. A technician can measure all four tires and recommend replacement based on their condition rather than on appearance alone.

• Look for a tread-depth indicator level with the tread.
• Use a penny test as a general check between visits.
• Book service for uneven wear or highway-speed vibration.

The service center is at 185 Taunton Avenue, Rte 44, Seekonk, MA 02771. Booking includes tread-depth measurement on all four tires and a rotation or replacement recommendation based on the inspection. You can also review current service specials before arranging your visit.

• Use the online appointment scheduler.
• Call the Seekonk service center for assistance.
• Request tire inspection and rotation for your vehicle.